|
FSC-6 Specifications and Features
|
|
Safety Features
- Full dual channel operation
- Positive operation state indicators
- Force guided relay
- Redundant critical control components
- Configuration for ANSI B11.19 guidelines
- Controlled access for installation, operation
- NEMA 12 and 13 enclosure
- Factory configured and inspected
Additional Protection Features (Optional)
- Illuminated reset button
- Additional light tower indicators
- Key operated mandatory reset
- Padlock kit for lock-out
Enclosure
Standard - NEMA-12 -
8" x 8" x 6"
Optional - 4X
Enclosure Fastening Technique
Standard - Front panel screw - tamper resistant
Optional - Key-lock, mechanical lockout
|
|
FSC Series - Safety Control
| Model |
Sizes |
Description |
| FSC-6-R |
1.75" x 3" x 4.75" |
Din Rail Relay |
| FSC-6-1Z |
8" x 8" x 4" |
1 Zone |
| FSC-6-2Z |
10" x 8" x 6" |
2 Zone |
| FSC-6-3Z |
14" x 8" x 6" |
3 Zone |
| FSC-6-4Z |
14" x 8" x 6" |
4 Zone |
| Special control configurations available. |
Machine Controls Outputs
Standard - 2 channel safe circuit
Contacts - 2 N.O. safety contacts
Contact type - Forced contact
Contact material - Ag-Alloy; Gold-plated
Switching voltage - 230/230 V AC/DC
Maximum continuous current per contact - 6 amps
Mechanical lifetime - 10 x 106 switching cycles
Recovery time (without RESET monitoring) - 8000 mSec
Working range ambient temperature: -25 to +55 °C
Internal Configuration
DIN 35mm rail design
Cage-Clamp wire design, touch safe
Isolated power, Switchmat, and machine control inputs |
Power
Standard - 120 VAC 60 HZ
Optional - 24 VDC
Rated voltage - 120 VAC
Rated consumption at 50 Hz - 2.5 watts
Rated frequency - 50 to 60 Hz
AC: Short-circuit proof transformer |
|
Presence Sensor Inputs
Standard - Single safety mat
Optional - Multiple zone inputs
Light screen
Gate switch
Limit switch
Positive sensor identification |
Front Panel Indicators
Standard -
Normal: GREEN
Halt: RED |
|
Front Panel Controls
Optional -
Manual RESET
Key operated RESET |
Risk Assessment
The level of safety protection required for a given application is based on the risk associated with that application. The risk associated with an operation is based on a number of factors that must be taken together and evaluated in total to establish the risk level for any equipment or operation.
|
|
Partial Listing of Applicable Safety Standards
|
ANSI B11.19-1990 Machine Tools - Safeguarding when referenced by other B11 machine tool safety standards - performance criteria for the design, construction, care, and operation
ANSI/RIA R15.06-1992 - for Industrial Robots and Robot Systems - Safety Requirements
|
|
ANSI Z244.1-1982 Personnel protection - Lockout/tagout of energy sources - Minimum safety requirements
ANSI/ASME B15.1 - 1984 Safety standard for mechanical power transmission apparatus
ANSI/NFPA 79-1991 Electrical standard for industrial machinery
|
